Seat Belt Does Not Retract When Door Opens - Both Buick
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Seat Belts System Check performed? | -- | Go to Step 2 | Go to Seat Belt System Check |
2 | Use a test lamp in order to backprobe the LH seat belt retractor actuator connector from cavity A (ORN) to ground. Did the test lamp light? | -- | Go to Step 3 | Go to Step 5 |
3 | Verify that G201 is clean and tight. Is G201 OK? | -- | Go to Step 4 | Go to Step 9 |
4 | Repair the open in CKT 151 (BLK) between G201 and S212. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Seat Belt System Check | -- |
5 | Visually inspect the RH rear fuse block PWR DR LK Fuse. Is the PWR DR LK Fuse OK? | -- | Go to Step 6 | Go to Step 7 |
6 | Repair the open in CKT 1540 (ORN) between the RH rear fuse block and S309. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Seat Belt System Check | -- |
7 | Repair the short to ground in CKT 1540 (ORN). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 8 | -- |
8 | Replace the RH rear fuse block PWR DR LK Fuse. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Seat Belt System Check | -- |
9 | Repair the ground G201. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Seat Belt System Check | -- |
