Did you perform the entire Exterior Lights System Check?

--

Go to Step 2

Go to Exterior Lights System Check

1. Disconnect the hazard flasher connector.
2. Measure the voltage to ground at the hazard flasher connector terminal B (ORN).

Is battery voltage measured?

--

Go to Step 3

Go to Step 5

1. Set the turn/hazard switch to the HAZARD position.
2. Connect a fused jumper between the hazard flasher connector terminal B (ORN) and terminal A (BRN)

Do all of the turn lamps light?

--

Go to Step 4

Go to Step 6

Replace the hazard flasher.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the open or short to ground in CKT 140 (ORN). Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Inspect CKT 27 (BRN) for an open or short to ground. Refer to Testing for Continuity or Testing for Short to Ground in Wiring Systems.

Is CKT 27 OK

--

Go to Step 7

Go to Step 8

Replace the turn/hazard switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle in Steering Wheel and Column - Tilt.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the suspect wiring. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Exterior Lights System Check

--