Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
DEFINITION: This table diagnoses inoperative fog lamp indicator. It assumes that the fog lamps operate properly. | ||||
1 | Did you perform the entire Fog Lights System Check? | -- | Got to Step 2 | Go to Fog Lights System Check |
2 | With the fog lamps on, backprobe with a DMM from the fog lamp switch connector cavity 5 (YEL) to ground. Is the voltage within the specified range? | 10-15V | Got to Step 3 | Got to Step 4 |
3 | Backprobe with a DMM from the fog lamp switch connector cavity 5 (YEL) to cavity 6 (BLK). Is the voltage within the specified range? | 10-15V | Got to Step 6 | Got to Step 5 |
4 | Repair the open in CKT 317 (YEL) between the fog lamp switch and S124. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Fog Lights System Check | -- |
5 | Repair the open in CKT 150 (BLK) between the fog lamp switch and S298. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Fog Lights System Check | -- |
6 | Replace the fog lamp switch. Is the repair complete? | -- | Go to Fog Lights System Check | -- |