Did you perform the entire Exterior Lights System Check?

--

Go to Step 2

Go to Exterior Lights System Check

1. Disconnect the turn/hazard switch assembly connector C202.
2. Set the headlamp switch to the PARK position.
3. Measure the voltage to ground at the turn/hazard switch assembly connector C202 terminal A8 (TAN).

Is battery voltage measured?

--

Go to Step 3

Go to Step 4

Replace the turn/hazard switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle in Steering Wheel and Column - Tilt.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the open or short to ground in CKT 1654 (TAN). Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Exterior Lights System Check

--