Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the entire Exterior Lights System Check? | -- | Go to Step 2 | |
2 |
Is battery voltage measured? | -- | Go to Step 3 | Go to Step 5 |
3 | Connect a fused jumper between the stoplamp/brake switch connector cavity A (ORN) and cavity B (WHT) Do the stop lamps light? | -- | Go to Step 4 | Go to Step 6 |
4 | Replace the stoplamp/BTSI switch. Refer to Stop Lamp Switch Replacement in Hydraulic Brakes. Is the repair complete? | -- | -- | |
5 | Repair the open or short to ground in CKT 140 (ORN). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Inspect CKT 17 (WHT) for an open. Refer to Testing for Continuity in Wiring Systems. Is CKT 17 OK? | -- | Go to Step 7 | Go to Step 8 |
7 | Replace the turn/hazard switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle in Steering Wheel and Column - Tilt. Is the repair complete? | -- | -- | |
8 | Repair the suspect wiring. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
