Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Audible Warnings System Check? | -- | Go to Step | |
2 |
Does the resistance measure less than the specified value? | -- | Go to Step 4 | Go to Step 3 |
3 | Inspect CKT 155 (BLK) for an open. Is there an open in CKT 155? | 2 ohms | Go to Step 11 | Go to Step 6 |
4 | Inspect the MALL connector C2 terminal C1 for proper terminal contact. Is the terminal contact OK? | -- | Go to Step 5 | Go to Step 10 |
5 | Replace the MALL. Refer to Body Control Module Replacement in Body Control System. Did you complete the repair? | -- | -- | |
6 | Inspect the left door jamb switch for continuity between terminal C and terminal D. Does the door switch show continuity? | -- | Go to Step 8 | Go to Step 7 |
7 | Replace the left front door jamb switch. Refer to Did you complete the repair? | -- | -- | |
8 | Inspect CKT 151 (BLK/WHT) for an open to ground. Is there an open to ground in CKT 151? | -- | Go to Step 9 | |
9 | Repair the open to ground in CKT 151. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
10 | Repair the faulty terminal contact. Refer to Connector Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
11 | Repair the open in circuit 155. Is the repair complete? | -- | -- |
