Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Content Theft Deterrent (CTD) System Check? | -- | Go to Step 2 | |
2 |
Is the resistance within the specified range? | 0 - 5 ohms | Go to Step 3 | Go to Step 5 |
3 |
Is the resistance within the specified range? | 0 - 5 ohms | Go to Step 4 | Go to Step 9 |
4 | Repair a short to ground in CKT 262 (LT GRN). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
5 | Use the DMM in order to measure the resistance between the RFA module harness connector CKT 263 (LT BLU/BLK) and ground. Is the resistance with the specified range? | 0 - 5 ohms | Go to Step 6 | Go to Step 10 |
6 |
Is the resistance within the specified range? | 0 - 5 ohms | Go to Step 7 | Go to Step 8 |
7 | Repair a short to ground in CKT 263 (LT BLU/BLK). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
8 | Replace the rear compartment lid tamper switch. Did you complete the repair? | -- | -- | |
9 | Replace the faulty front door lock cylinder switch. Did you complete the repair? | -- | -- | |
10 | Replace the RFA module. Refer to Remote Control Door Lock Receiver Replacement in Keyless Entry. Did you complete the repair? | -- | -- |
