GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Aurora 🢒 Body and Accessories 🢒 Doors 🢒 Power Mirrors Inoperative in Left/Right Direction - Right Side

Power Mirrors Inoperative in Left/Right Direction - Right Side Without Memory

Step

Action

Value(s)

Yes

No

1

Did you perform the Power Mirrors System Check?

--

Go to Step 2

Go to Outside Mirrors System Check

2
  1. Disconnect the RH outside rear view mirror connector.
  2. Disconnect the outside mirror switch connector.
  3. Connect the digital multimeter (DMM) between the mirror switch connector terminal E and the RH outside rear view mirror connector terminal B.

Does the resistance measure within the specified range?

0-5 ohms

Go to Step 3

Go to Step 4

3

Connect a DMM between the outside mirror switch connector terminal M and the RH outside rear view mirror connector terminal A.

Does the resistance measure within the specified range?

0-5 ohms

Go to Step 5

Go to Step 6

4

Repair a faulty connection or an open in CKT 881 (RED/WHT). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

5

Connect a DMM between the outside mirror switch connector terminal C and the RH outside rear view mirror connector terminal C.

Does the resistance measure within the specified range?

0-5 ohms

Go to Step 7

Go to Step 8

6

Repair a faulty connection or an open in CKT 82 (LT BLU). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

7

Connect a DMM between the outside mirror switch connector terminal S and the RH outside rear view mirror connector terminal D.

Does the resistance measure within the specified range?

0-5 ohms

Go to Step 9

Go to Step 10

8

Repair a faulty connection or open in CKT 889 (PPL/WHT). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

9
  1. Move the mirror select switch to the right position.
  2. Connect a DMM between the RH outside rear view mirror connector terminal C and ground.
  3. Position the mirror switch to the down position.

Does the voltage measure within the specified range?

10-15 V

Go to Step 11

Go to Step 12

10

Repair a faulty connection or an open in CKT 88 (YEL). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

11
  1. Connect a DMM between the RH outside rear view mirror connector terminal B and ground.
  2. Position the mirror switch to the right position.

Does the voltage measure within the specified range?

10-15 V

Go to Step 15

Go to Step 12

12

Test the mirror switch connector terminal contact.

Refer to Intermittents and Poor Connections Diagnosis in Wiring Systems.

Is there proper terminal contact?

--

Go to Step 14

Go to Step 13

13

Repair the improper terminal contact. Refer to Connector Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

14

Replace the outside mirror switch. Refer to Power Mirror Switch Replacement .

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

15

Test the RH outside rear view mirror connector terminal contact.

Refer to Intermittents and Poor Connections Diagnosis in Wiring Systems.

Is there proper terminal contact?

--

Go to Step 17

Go to Step 16

16

Repair the improper terminal contact. Refer to Connector Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

17

Replace the RH outside rear view mirror. Refer to Power Mirror Replacement .

Did you complete the repair?

--

Go to Outside Mirrors System Check

--