Power Accessory Switch Panel Replacement Oldsmobile
Removal Procedure
- Remove the trim panel (3).
Refer to
Front Side Door Trim Panel Replacement
or
Rear Side Door Trim Panel Replacement
.
- Disconnect the passenger side temperature control switch harness (right
side only).
- Remove the two screws (2,4)
and the six retainer clips (5) which retain the insert (7) to
the trim panel.
- Remove the insert panel (2)
while guiding the wiring harness through the door panel.
- Disengage the wiring harness from the retaining tab.
- Disengage the tabs that
retain the door lock/seat switch assembly (1) to the insert.
- Remove the door lock/seat switch assembly (1) from the
insert
Installation Procedure
- Install the door lock/seat
switch assembly (1) into the insert.
- Fasten the tabs in order to retain the door lock/seat switch assembly (1)
to the insert.
- Install the insert (2).
- Install the two screws (2,4)
and the six retainer clips (5) in order to retain the insert (7)
to the trim panel.
- Position the trim panel next to the door.
- Connect the passenger temperature control switch harness (right
side only).
- Install the trim panel (3).
Refer to
Front Side Door Trim Panel Replacement
or
Rear Side Door Trim Panel Replacement
.