Did you perform the Power Windows System Check?

--

Go to Step 2

Go to Power Windows System Check

1. Disconnect the power window control module connector.
2. Place the ignition switch in the RUN position.
3. Connect a (DMM) between the power window module connector terminal A (BRN) and ground.

Does the voltage measure within the specified range?

10-15 V

Go to Step 4

Go to Step 3

Repair an open in CKT 141 (BRN). Refer to Wiring Repairs in Wiring systems.

Did you complete the repair?

--

Go to Power Windows System Check

--

1. Connect a DMM between the power window control module connector terminal C (DK BLU) and ground.
2. Use the left front power window switch to actuate the left front window UP.

Does the voltage measure within the specified range?

10-15 V

Go to Step 6

Go to Step 5

Repair an open in CKT 164 (DK BLU). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Power Windows System Check

--

1. Close the left front power window.
2. Inspect the window regulator counterbalance for proper winding. Refer to Power Windows Circuit Description .

Is the spring winding correct?

--

Go to Step 8

Go to Step 7

Rewind the counterbalance spring. Refer to Power Windows Circuit Description .

Did you complete the repair?

--

Go to Power Windows System Check

--

Replace the power window control module. Refer to Front Side Door Window Module Replacement .

Did you complete the repair?

--

Go to Power Windows System Check

--