Removal Procedure
- Insert a narrow flat-bladed
tool into the notch of the lens (2) in order to remove the front courtesy/reading
lamp lens.
- Use a narrow flat-bladed tool in order to disengage the snap legs
at the front and the rear of the lamp (1).
Remove the lamp assembly (1).
- Use a narrow flat-bladed tool in order to disengage the tabs that
retain the overhead compartment bezel (6) to the roof.
One tab is at the front of the roof and 2 tabs are at the rear
of the roof.
- Remove the fasteners that retain the lamp switches (5)
to the bezel (6).
- Disengage the tabs that retain the sunroof switch (3) to
the bezel (6).
If you replace the sunroof switch, use a cut and splice process. Refer
to Repair Procedures Cell 5 in Electrical Diagnosis.
Installation Procedure
- Install the sunroof switch (3)
to the bezel (6).
- Install the fasteners that retain the switches (3,5).
- Install the overhead compartment bezel (6) to the roof.
- Install the lamp assembly (1).
- Install the courtesy lamp/reading lamp lens (2).