Removal Procedure
- Remove the seat. Refer to
Seat Replacement
.
- Remove the hog rings that secure the lower seatback skirt. Refer to
Front Seat Back Cushion Cover and Cushion Pad Replacement
.
- Remove the pins and the keeper locks that retain the seatback actuator
recliner.
- Remove the seat belt anchor bolt.
- Disconnect the seat belt connector.
- Remove the seat belt.
- Remove the outboard side track trim cover.
- Remove the seat frame assembly bolts and the frame.
- Disconnect the electrical connectors.
- Disconnect the pneumatic hoses.
- Remove the lumbar pump motor on the driver seat.
- Remove the actuator recliner motor fasteners.
- Remove the actuator recliner motor.
Installation Procedure
- Install the actuator recliner motor to the seat bottom.
- Install the actuator recliner motor fasteners.
- Install the lumbar pump motor on the driver seat.
- Connect the electrical connectors.
- Connect the pneumatic hoses.
- Install the seat frame assembly and the retaining bolts.
- Install the seat track trim panel.
- Install the seat belt and the anchor bolt.
- Connect the seat belt electrical connector.
- Install the retaining pins and the clips.
- Install the hog rings.
- Install the seat. Refer to
Seat Replacement
.
- If the vehicle is equipped with memory seats, calibrate the seat. Refer
to
Memory Seat Calibration
.