GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 650769  Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the left fascia extension. Refer to Front Bumper Fascia Extension Replacement in Bumpers.
  3. Cut band clamp that retains the inlet hose to the chassis.
  4. Remove the inlet hose (3) from the pump and from the vehicle
  5. Transfer any parts as necessary.

Installation Procedure


    Object Number: 650769  Size: SH
  1. Install the inlet hose (3) to the pump.
  2. Install the band clamp.
  3. Install the left fascia extension. Refer to Front Bumper Fascia Extension Replacement in Bumpers.
  4. Lower the vehicle.