GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2002 🢒 Aurora 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Steering Wheel Control Switch Assembly Replacement

Removal Procedure

    Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could cause the following conditions:

       • Air bag deployment
       • Personal injury
       • Unnecessary SIR system repairs
    In order to avoid the above conditions, observe the following guidelines:
       • Refer to SIR Component Views in order to determine if you are performing service on or near the SIR components or the SIR wiring.
       • If you are performing service on or near the SIR components or the SIR wiring, disable the SIR system. Refer to Disabling the SIR System.

  1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
  2. Remove the steering wheel inflatable restraint module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.

    3. Object Number: 720528 Size: SH
  3. Remove the steering wheel control switch by gently pulling it away from the steering wheel.
  4. Disconnect the steering wheel control switch electrical connector.
  5. Remove the steering wheel control switch from the steering wheel.

Installation Procedure

    Object Number: 720528 Size: SH
  1. Connect the electrical connector to the steering wheel control switch.
  2. Align the steering control switch engagement tabs to the steering wheel.
  3. Push in on the steering wheel control switch in order to secure the steering wheel control switch to the steering wheel.
  4. Install the steering wheel inflatable restraint module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  5. Enable the SIR. Refer to Enabling the SIR System in SIR.