GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2002 🢒 Aurora 🢒 General Information 🢒 Vibration Diagnosis and Correction 🢒 Engine Front Mount Replacement

Removal Procedure
  1. Remove the front engine mount bracket. Refer to Engine Front Mount Bracket Replacement .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    3. Object Number: 647786 Size: SH
  3. Remove the nut securing the front engine mount to the engine frame.
  4. Lower the vehicle.
  5. Remove the front engine mount from the vehicle.

Installation Procedure

    Object Number: 647786 Size: SH
  1. Insert the front engine mount stud (long) through the hole in the engine frame.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the nut securing the front engine mount to the engine frame.

    4. Tighten
    Tighten the front engine mount nut to 70 N·m (52 lb ft).

  4. Lower the vehicle.
  5. Install the front engine mount bracket. Refer to Engine Front Mount Bracket Replacement .