Removal Procedure
Notice:
| • | Do not attempt to straighten kinked nylon pipes. Replace any kinked
nylon pipes in order to prevent damage to the vehicle. |
| • | Do not attempt to repair sections of nylon pipes. Replace damaged
nylon pipes. |
| • | Replace the vapor pipes with original equipment or parts that
meet GM specifications. |
| • | Replace the vapor hoses with original equipment or parts meeting
GM specifications. Use only reinforced fuel-resistant hose identified with
the word Fluoroelastomer or GM 6163M on the hose. |
- Remove the fuel tank (5).
Refer to
Fuel Tank Replacement
.
- Disconnect the EVAP vent hose/pipe (1) from the fill limiter vent
valve.
- Remove the EVAP vent hose/pipe from the fuel tank (5).
Installation Procedure
- Position the EVAP vent
hose/pipe (1) on the fuel tank (5).
- Connect the EVAP vent hose/pipe (1) to the fuel limiter vent valve.
- Install the fuel tank. Refer to
Fuel Tank Replacement
.
- Lower the vehicle.
