For 1990-2009 cars only
- Remove the two bolts from the headlamp assembly.
- Use a large screwdriver by the outside mount to separate the lamp assembly from the outboard snap mounting pin. Slide the headlamp assembly outward and lift it out.
- Disconnect the wiring harness from the headlamp assembly.
- Lift the tabs to remove the bulb from the assembly.
- Replace the bulb.
- Push the bulb assembly in and turn it clockwise to install the bulb assembly into the headlamp assembly.
- Then reconnect the wiring harness to the lamp assembly.
- Slide the lamp assembly back into place by lining up the track on the bottom of the assembly with the guide on the vehicle.
- Then connect the outboard snap mounting pin.
- Secure the lamp assembly with the two bolts.
