REAR SUSPENSION SPRING CLUNK INSTALL LWR. SPRING INSULATOR

SUBJECT: REAR SUSPENSION SPRING CLUNK - INSTALL SPRING LOWER INSULATORS

MODELS/YEARS: 1991 CUSTOM CRUISER

CONDITION: Some 1991 Custom Cruisers assembled prior to vehicle number MW307376 may exhibit a dunking type noise from the rear of the vehicle when being operated over irregular road surfaces.

CAUSE: Rear coil spring movement on rear axle assembly spring seats.

CORRECTION: Install rear spring lower insulators at the spring to axle assembly seat interface. P/N 10004110 (2 required per vehicle) is currently available from GMSPO. Follow applicable Service Manual procedures.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.