CORE INFORMATION TAG REMANUFACTURED GENERATOR

MODELS/YEARS: ALL 1986 MODELS EXCEPT CUTLASS SUPREME AND CUSTOM CRUISER

A remanufactured unit is used to replace the new CS-121 and CS-130 generaton or PMGR starter motors. Both a remanufactured unit and service parts are available for CS-144.

The service parts available for the CS-144 generator models 1105615, 1105616, 1105625 and 1105626 are listed below and are available from WDDGM through normal parts ordering procedures.

Complete CS-144 remanufactured generator assemblies will continue to be available for service when component repair is impractical.

Model Numbers Part Number Part Name Applicable ----------- --------- ------------- 1116408 Regulator All 1989599 Rotor 108 amp 5615, 5625 1989708 Rotor 120 amp 5616, 5626 1989705 Stator Assembly All 1989706 Frame - Slip Ring End All 1989711 Ball Bearing - Slip Ring End All 1989774 Rectifier Bridge - Pos. All 453996 Nut - Rectifier Bridge All 10497789 Connector - from Rectifier Bridge to Stator Lead All 1988971 Screw and Washer - Rectifier Bridge Attachment All 1989702 Brush Holder and Brush Assembly All 1989659 Spring Brush All 1894586 Screw - Brush Holder Attachment (Ground) All 1989699 Screw - Regulator Attachment (Insulated) All 1975471 Terminal Package - Battery All 1989703 Capacitor All 1988970 Screw Capacitor and Rectifier Bridge Attachment All 1989601 Frame - Drive End 5615, 5616 1989709 Frame - Drive End 5625, 5626 908419 Ball Bearing - Drive End All 1977674 Plate - Ball Bearing Retainer Drive End All 1975736 Screw - Ball Bearing Retainer Plate All 1985999 Collar - Shaft - Outside Drive End All 1986000 Collar - Shaft - Inside Drive End All 1978064 Collar - Shaft - Between Fan and Pulley All 1915172 Nut - Shaft - Drive End All 1941978 Lock Washer Shaft Nut D.E. All 1989690 Thru Bolt All 1985964 Pulley 5615, 5625 1989104 Pulley 5616, 5626 1978026 Fan All

A core information tag comes with the remanufactured assembly. This tag is to be completed and returned with the defective generator or starter motor.

It is very important that this tag be filled out completely. With complete information, Delco Remy will be able to quickly identify and correct any problem areas on these new products.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.