SERVICE MANUAL UPDATE SEC. 3A REAR WHEEL CAMBER SPEC.

SUBJECT: SERVICE MANUAL UPDATE - CHANGE IN REAR CAMBER SERVICE SPECIFICATION

MODELS/YEARS: 1991 CUTLASS SUPREME

When servicing a 1991 Oldsmobile Cutlass Supreme, the rear wheel camber specifications should read as follows, on Page 3A-8 of the 1991 Cutlass Supreme Service Manual, Vol. 1.

Service Checking - 0.15 degrees + /- 0.5 degrees Service Setting - 0.15 degrees

Please note these changes in your 1991 Service Manual.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.