SERVICE MANUAL UPDATE SEC. 3A REAR WHEEL CAMBER SPEC.

SUBJECT: SERVICE MANUAL UPDATE - SECTION 3A WHEEL ALIGNMENT (CHANGE IN REAR CAMBER SERVICE SPECIFICATION)

VEHICLES AFFECTED: 1991 OLDSMOBILE 'W' ------------------

When servicing the 1991 Oldsmobile Cutlass Supreme the rear wheel camber specifications should read as follows, on Page 3A-8 of the Service Manual.

Service Checking .15 degrees +/- .5 degrees)

Service Setting .15 degrees)

Please note these changes in your 1991 Service Manual.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.