TRIM DAMAGE FRONT SEAT SIDE PANEL (RPL. FOAM CUSHION/TRIM)

SUBJECT: TRIM DAMAGE FRONT SEAT SIDE PANEL - REPLACE FOAM CUSHION AND TRIM, IF REQUIRED

MODELS/YEARS: 1992-93 CUTLASS SUPREME WITH (RPO AN3) SEAT OPTION

CONDITION: Some 1992-93 Cutlass Supreme models may exhibit stress marks on the driver and/or passenger seat back trim side panel.

CAUSE: Wire within foam bun exerts excessive pressure on foam side panel while sliding into or out of front seats.

CORRECTION: Replace front seat back foam cushion P/N 16726120 and trim if damaged. Follow procedure in Body Service Manual, Section 1 0, Page 10-1 0-8.

PART "AVAILABILITY: Parts are currently available from GMSPO.

WARRANTY INFORMATION: Use the current Labor Time Guide.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.