SERVICE MANUAL UPDATE-SEC 10-6 DOOR WINDOW WEATHERSTRIP

SUBJECT: DOOR WINDOW WEATHERSTRIP - FRONT DOOR

MODELS/YEARS: 1993 CUTLASS SUPREME

The Service Manual procedure contained in this update supersedes the procedure published on page 10- 6-12 of the 1993 Cutlass Supreme Service Manual.

DOOR WINDOW WEATHERSTRIP - FRONT DOOR (Except Convertible)

Remove or Disconnect:

1. Door trim panel.

2. Inner belt sealing strip.

3. Outside mirror and filler assembly.

4. Window assembly.

5. Upper guide loop cover and nut.

6. Door frame Applique (Sedan only).

7. Door frame garnish moldings.

8. Door window weatherstrip by grasping weatherstrip and removing from door flange.

Install or Connect:

1. Door window weatherstrip.

a. Start at upper rear comer and working downward, seating vertical leg of weatherstrip into door frame and below the beft line.

b. Work forward from upper rear corner, seating weatherstrip into door window frame across top and down front portion of door and continue to belt line.

2. Door frame garnish moldings.

3. Door frame Applique (Sedan only).

4. Upper guide loop cover and nut.

5. Window assembly.

6. Outside mirror and filler assembly.

7. Inner belt sealing strip.

8. Door trim panel.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.