GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1997 🢒 Cutlass Supreme 🢒 Engine 🢒 Engine Controls - 3.4L (LQ1) 🢒 Throttle Position Sensor Replacement

Removal Procedure
Object Number: 16239 Size: SH
  1. Remove the TP sensor electrical connector.
  2. Remove the two TP sensor attaching screws.

Installation Procedure
Object Number: 16239 Size: SH
  1. With the throttle valve in the normal closed idle position, install the TP sensor on the throttle body assembly.
  2. Install the two TP sensor attaching screws, using a thread-locking compound on the screws. Loctite® 262, GM Part No. 1052624, or equivalent should be used.

    3. Tighten
    Tighten TP sensor attaching screws to 2 N·m (18 lb in)

  3. Install the TP sensor electrical connector.