Spark Plug Wires Not Operating Properly L36 and L67
Removal Procedure
Caution: Wash your hands after handling coated spark plugs and before smoking.
The coating is a non-hazardous material and incidental contact will not cause
any adverse effects. However, exposure to polymer vapors - the result
of contamination of cigarette products and subsequent burning
of the polymer - may result in flu-like symptoms and should be
avoided.
Notice: Note the spark plug wire harness routing during harness removal. Improper
routing during installation can cause the following conditions:
• | Spark plug crossfiring |
• | Cutting and chaffing of the wires |
- Turn OFF the ignition.
- Remove the engine cover.
Notice: Twist the spark plug boot one-half turn in order to release the boot.
Pull on the spark plug boot only. Do not pull on the spark plug wire or the
wire could be damaged.
- Remove the spark plug wire harness from the ignition coils.
- Remove the harness from the spark plugs.
- Remove the complete harness from the vehicle.
Installation Procedure
- Install the harness to the spark plugs.
- Install the harness on the ignition coils.
- Install the harness on clips.
- Install the engine cover.