Was the headlight system check preformed?

--

Go to Step 2

Go to Headlight System Check

Was the fog lamp system check performed?

--

Go to Step 3

Go to Fog Lights System Check

1. Turn the ignition switch to the ON position.
2. Turn the headlamp switch to the HEAD position.
3. Turn the headlamp dimmer switch to the LOW position.
4. Turn the fog lamp switch to the ON position.
5. Using a test light, backprobe the fog lamp switch harness connector terminal F and terminal D.

Does the test light illuminate?

--

Go to Step 5

Go to Step 4

1. Check for a poor connection or open in circuit 34 between the underhood accessory wiring junction block harness connector C2 terminal F6 and the fog lamp switch connector terminal F.
2. If OK replace the underhood accessory wiring junction block. Refer to Accessory Wiring Junction Block Replacement in Body Front End.

Has the repair been made?

--

Go to Fog Lights System Check

--

Replace the fog lamp switch. Refer to Instrument Panel Multifunction Switch Assembly Replacement in Instrument Panel and Console.

Has the repair been made?

--

Go to Fog Lights System Check

--