Armrest Pull Cup Replacement All

1. Remove the screws from the pull handle.
2. Remove the pull handle from the door inner trim panel.

1. Install the pull handle to the door trim panel.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




2. Install the screws to the pull handle.

Tighten
Tighten the pull handle screws to 2 N·m (18 lb in).