GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Intrigue 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Outer Sealing Strip Replacement

Removal Procedure
  1. Lower the rear door window.

    2. Object Number: 164734 Size: SH
  2. Remove the outer belt sealing strip screw.
  3. Remove outer belt sealing strip from the rear door pinchweld flange, by pulling the sealing strip upward.

Installation Procedure

    Object Number: 164734 Size: SH
  1. Install the outer belt sealing strip to the rear door pinchweld flange align the sealing strip with the screw hole.

    2. Press the strip into place until fully seated.

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the outer belt sealing strip screw.

    3. Tighten
    Tighten the outer belt sealing strip screw to 1.5 N·m (13 lb in).

  3. Raise the rear door window.