GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Intrigue 🢒 Body and Accessories 🢒 Doors 🢒 Rear Door Frame Applique Replacement

Removal Procedure
  1. Remove the rear door outer belt sealing strip screw.
  2. Unsnap the front of the window weatherstrip retainer.

    3. Hold the weatherstrip away from the door.


    Object Number: 164723 Size: SH
  3. Slide the door frame applique upwards.
  4. Remove the door frame applique from the door.

Installation Procedure

    Object Number: 164723 Size: SH
  1. Install the door frame applique to the rear door.
  2. Slide the door frame applique downwards.
  3. Install the front of the window weatherstrip retainer.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the door outer belt sealing strip screw.

    5. Tighten
    Tighten the outer belt sealing strip screw to 1.5 N·m (13 lb in).