GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Remove the center console. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.

  3. Object Number: 190956  Size: SH
  4. Disconnect electrical connector from the Automatic Transmission Shift Lock Control Actuator.

  5. Object Number: 442716  Size: SH
  6. Remove both ends of the Automatic Transmission Shift Lock Control Actuator from pivot points (1).

Installation Procedure


    Object Number: 190956  Size: SH
  1. Install the Automatic Transmission Shift Lock Control Actuator upper clip onto upper pivot point, and lower clip onto the lower pivot point.
  2. Install the Center Console. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console.
  3. Install electrical connector to the Automatic Transmission Shift Lock Control Actuator.
  4. Connect negative battery cable. Refer to Battery Negative Cable Disconnection and Connection In Engine Electrical.