GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Intrigue 🢒 Body and Accessories 🢒 Seats 🢒 Rear Folding Seat Back Latch Striker Replacement

Removal Procedure
  1. Remove the seat back. Refer to Rear Seat Back Replacement .
  2. Lift the seat frame trim to expose the striker screws.

    3. Object Number: 815400 Size: SH
  3. Remove the striker screws (1).

    4. Object Number: 815414 Size: SH
  4. Remove the seat back striker (1) and the spacer (2) from the seat back support.

Installation Procedure

    Object Number: 815400 Size: SH
  1. Position the seat back striker and the spacer on the seat back support.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the seat back striker screws (1).

    3. Tighten
    Tighten the screws to 6 N·m (53 lb in).

  3. Reposition the seat frame trim to its original position.
  4. Install the seat back. Refer to Rear Seat Back Replacement .