GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2002 🢒 Intrigue 🢒 Engine 🢒 Engine Electrical 🢒 Instrument Panel Multifunction Switch Replacement

Removal Procedure

    Object Number: 182722 Size: SH
  1. Remove the instrument panel (I/P) steering column opening filler. Refer to Steering Column Opening Filler Replacement .
  2. Remove the screws from the switch bezel.
  3. Pull the switch bezel from the I/P trim pad.
  4. Disconnect the electrical connectors.
  5. Disengage the switch retainers. Remove the I/P lamp dimmer switch, the fog lamp switch , and the rear compartment lid release switch from the switch bezel, as required.

Installation Procedure

    Object Number: 182722 Size: SH
  1. Install the I/P lamp dimmer switch, the fog lamp switch, and the rear compartment lid release switch to the switch bezel, as required.
  2. Connect the electrical connectors.
  3. Align the switch bezel to the I/P trim pad.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the switch bezel screws.

    5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Install the I/P steering column opening filler. Refer to Steering Column Opening Filler Replacement .