For 1990-2009 cars only
Removal Procedure
- Remove the water inlet housing. Refer to Engine Coolant Thermostat Replacement in Engine Cooling.
- Remove the left secondary camshaft timing sprocket. Refer to Secondary Camshaft Timing Sprocket Replacement - Left Side .
- Remove the secondary drive chain tensioner bolts.
- Remove the secondary drive chain tensioner.
Installation Procedure
- Position the secondary timing chain tensioner between the camshafts.
- Install the secondary timing chain tensioner bolts.
- Once mounted, compress the left secondary timing chain tensioner shoe with your hand.
- Lock the left secondary timing chain tensioner by inserting a piece of wire (2) into the access hole in the side of the tensioner.
- Slowly release the pressure from the left secondary timing chain tensioner shoe. The tensioner should remain compressed.
- Install the left secondary camshaft timing sprocket. Refer to Secondary Camshaft Timing Sprocket Replacement - Left Side .
- Install the water inlet housing. Refer to Engine Coolant Thermostat Replacement in Engine Cooling.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 12 N·m (106 lb in).
