Removal Procedure
- Remove the primary camshaft drive chain tensioner. Refer to Primary Camshaft Drive Chain Tensioner Replacement .
- Remove the chain guide access plug (2) located in the cylinder head. Note the O-ring seal on the access plug.
- Remove the primary drive chain tensioner shoe bolt using the access hole in the cylinder head.
- Remove the primary camshaft drive chain tensioner shoe (1) by pulling the shoe downward through the front cover area.
Installation Procedure
- Install the primary camshaft drive chain tensioner shoe (1) upward through the front cover area, aligning the shoe to the threaded hole in the cylinder head.
- Install the primary drive chain tensioner shoe bolt using the access hole in the cylinder head.
- Install the chain guide access plug (2).
- Install the primary camshaft drive chain tensioner. Refer to Primary Camshaft Drive Chain Tensioner Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolt to 30 N·m (22 lb ft).
Important: Ensure that the chain guide access plug has an O-ring installed.
Tighten
Tighten the plug to 5 N·m (44 lb in).
