Removal Procedure
- Remove the instrument panel (IP) upper trim pad. Refer to
Instrument Panel Upper Trim Panel Replacement
in Instrument
Panel, Gages, and Console.
- Disconnect the sunload
sensor (1) and the daytime running lamp (DRL) light sensor (3) from the defroster
grille.
- Disconnect the electrical connector (2) from the sunload sensor.
- Remove the sunload sensor (1).
Installation Procedure
- Connect the electrical
connector (2) to the sunload sensor.
- Install the sunload sensor (1) and the DRL light sensor (3) to
the defroster grille.
- Install the IP upper trim pad. Refer to
Instrument Panel Upper Trim Panel Replacement
in Instrument Panel, Gages, and
Console.