GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2002 🢒 Intrigue 🢒 Body and Accessories 🢒 Interior Trim 🢒 Console, Bezel, and Retainer Replacement - Overhead Console

Removal Procedure

    Object Number: 784260 Size: SH
  1. Remove the overhead console (1) Refer to Roof Console Replacement .
  2. Lower the headliner to access the bezel retainer. Refer to Headlining Trim Panel Replacement .

    3. Object Number: 786249 Size: SH
  3. Remove the bezel retainer screws.
  4. Remove the bezel and remove the bezel retainer from the headliner.

Installation Procedure

    Object Number: 786249 Size: SH
  1. Position the bezel and the bezel retainer on the headliner.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the retaining screws to the overhead console bezel.

    3. Tighten
    Tighten the retaining screws to 3 N·m (27 lb in).


    Object Number: 784260 Size: SH
  3. Install the headliner. Refer to Headlining Trim Panel Replacement .
  4. Install the overhead console. Refer to Roof Console Replacement .