GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2002 🢒 Intrigue 🢒 Body and Accessories 🢒 Keyless Entry 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure
  1. Remove the upper trim panel from the instrument panel (IP). Refer to Instrument Panel Upper Trim Panel Replacement in Instrument Panel, Gages, and Console.

    2. Object Number: 183418 Size: SH
  2. Release the door lock receiver from the IP by releasing the retainer tabs.
  3. Disconnect the electrical connector.
  4. Remove the door lock receiver.

Installation Procedure

    Object Number: 183418 Size: SH
  1. Connect the electrical connector.
  2. Install the door lock receiver to the IP.

    3. Press into place until the retainers are fully seated.

  3. Install the IP upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement in Instrument Panel, Gages, and Console.
  4. Program the transmitter to the new receiver. Refer to Transmitter Programming .