INCORRECT PRESSURE SPECIFICATION (80 PSI) WAS GIVEN FOR RESISTANCE READING OF 86 OHM FOR OIL PRESSURE SENDER/SWITCH ON PAGE 8A-82-3.
A MEASURED RESISTANCE OF 86 OHMS WILL BE OBTAINED IN THE OIL PRESSURE SENDER/SWITCH AT A PRESSURE OF 120 PSI.
PLEASE UPDATE YOUR SERVICE MANUALS ACCORDINGLY.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.
COPYRIGHT 1991 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.