GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Silhouette Ext. 🢒 Engine 🢒 Engine Controls - 3.4L 🢒 Accelerator Pedal Replacement

Removal Procedure

    Object Number: 50412 Size: SH
  1. Remove the left instrument panel sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in body and accessories.
  2. Disconnect the accelerator cable from accelerator pedal.
  3. Remove the bolts and studs holding the accelerator pedal to the bulk head.
  4. Remove the accelerator pedal.

Installation Procedure

    Object Number: 50412 Size: SH
  1. Position the accelerator pedal to the bulkhead.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Reinstall the accelerator pedal bolt and stud.

    3. Tighten
    Tighten the accelerator pedal assembly bolts and studs to 3.0 N·m (27 lb in).

  3. Connect the accelerator cable to accelerator pedal.
  4. Check for complete throttle opening and closing positions by operating the accelerator pedal. Also check for poor carpet fit under the accelerator pedal.
  5. Reinstall the left instrument panel sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in body and accessories.