GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Silhouette Ext. 🢒 Engine 🢒 Engine Controls - 3.4L 🢒 Ignition Coil Replacement

Removal Procedure
  1. Disconnect the spark plug wires from the coil(s).
  2. Remove the screws securing the coil(s) assembly to the ignition control module.

    3. Object Number: 162818 Size: SH
  3. Remove the coil from the ignition control module.

Installation Procedure

    Object Number: 162818 Size: SH
  1. Carefully reinstall the ignition coil(s) on the ignition control module.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Reinstall the attaching screws.

    3. Tighten
    Tighten the screws to 4-5 N·m (40 lb in).

  3. Reconnect the spark plug wires.