For 1990-2009 cars only
Removal Procedure
- Pull the front door roof drip weather-strip from the pinch-weld flange.
- Clean all of the adhesive from the pinch-weld flange.
Installation Procedure
- Align the front door roof drip weather-strip to the pinch-weld flange at the upper C-pillar.
- Work the weather-strip forward and down the A-pillar.
- Tuck the forward end of the front roof drip weather-strip under the fender.
Important: A mastic/sealer/glue is inside the new front door opening weather-strip. If you are using a new front door opening weather-strip, do not use any weather-strip adhesive.
If the old front door roof drip weather-strip is reused, apply weather-strip adhesive.