Fastener Tightening Specifications. Oldsmobile Silhouette Ext. 2001

For 1990-2009 cars only

Makes 🢒 Oldsmobile 🢒 2001 🢒 Silhouette Ext. 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Fastener Tightening Specifications

Application	Specification
Application	Metric	English
A/C Refrigerant Filter Flare Nut	15 N·m	11 lb ft
A/C Refrigerant Pressure Sensor	5 N·m	44 lb in
Actuator Screws, All	0.9 N·m	8 lb in
Air Baffle Bolts	20 N·m	15 lb ft
Air Distributor Cover Screws	0.9 N·m	8 lb in
Air Inlet Housing Screws	0.9 N·m	8 lb in
Auxiliary A/C Line Block Fitting Bolt	20 N·m	15 lb ft
Auxiliary A/C Pipe to TXV Bolt	11 N·m	97 lb in
Auxiliary Air Distribution Duct Screws	10 N·m	89 lb in
Auxiliary Blower Motor Screws	1.6 N·m	14 lb in
Auxiliary HVAC Module Assembly Mounting Bolts and Nut	10 N·m	89 lb in
Auxiliary TXV to Evaporator Core Mounting Bolts	3.5 N·m	31 lb in
Blower Motor Mounting Screws	1.8 N·m	16 lb in
Blower Resister Mounting Screws	1.8 N·m	16 lb in
Center Air Distribution Duct Retaining Nut	10 N·m	89 lb in
Compressor Mounting Bolts	50 N·m	37 lb ft
Condenser Mounting Bolts	1.9 N·m	17 lb in
Cross Vehicle Beam Bolts	25 N·m	18 lb ft
Discharge Hose to Compressor Nut	16 N·m	12 lb ft
Discharge Hose to Condenser Nut	16 N·m	12 lb ft
Evaporator Inlet Line to Condenser Bolt	16 N·m	12 lb ft
Evaporator Inlet Line Clamp Nut	3.3 N·m	29 lb in
Evaporator Outlet Line Bracket Bolt	16 N·m	12 lb ft
Evaporator Outlet Line to TXV Nut	16 N·m	12 lb ft
Heater Core Cover Screws	0.9 N·m	8 lb in
Heater Core Pipe Retaining Clamp Screw	0.9 N·m	8 lb in
Heater Inlet Pipe Bracket Nut	7 N·m	62 lb in
Heater Outlet Duct Screws	0.9 N·m	8 lb in
HVAC Module Case Screws	0.9 N·m	8 lb in
HVAC Module to Cross Vehicle Beam Mounting Bolts	10 N·m	89 lb in
HVAC Module to Dash Panel Sound Barrier Nuts	10 N·m	89 lb in
HVAC Mounting Bracket Screws	1.8 N·m	16 lb in
Left Wiper Arm Linkage Nuts	5 N·m	44 lb in
Mode Actuator Mounting Bracket Screws	0.9 N·m	8 lb in
Receiver Dehydrator Base Mounting Bolts	6 N·m	53 lb in
Receiver Dehydrator Upper Mounting Bolts	6 N·m	53 lb in
Right Hand Temperature Actuator Mounting Bracket Screws	0.9 N·m	8 lb in
Service Port	11 N·m	98 lb in
Suction Hose to Compressor Nut	16 N·m	12 lb ft
Suction Hose to Evaporator Outlet Line Bolt	16 N·m	12 lb ft
Temperature Door Lever Bolt	0.9 N·m	8 lb in
Thermal Expansion Valve to Evaporator Core Mounting Bolts	3.2 N·m	28 lb in