GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2004 🢒 Aztek - AWD 🢒 Driveline/Axle 🢒 Drive Axle - Locking/Limited Slip 🢒 Module, Transmission Control - Replace

Removal Procedure
  1. Turn the ignition OFF.

    2. Object Number: 1404634 Size: SH
  2. Remove the air cleaner upper cover. Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.6L (LY7).

    3. Object Number: 1395508 Size: SH
  3. Remove the transmission control module (TCM) from the air cleaner.
  4. Disconnect the transmission control module electrical connectors from the TCM.

Installation Procedure

    Object Number: 1395508 Size: SH
  1. Connect the transmission control module electrical connectors to the TCM.
  2. Install the TCM to the air cleaner.

    3. Object Number: 1404634 Size: SH
  3. Install the air cleaner upper cover. Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.6L (LY7).
  4. Program the TCM. Refer to Transmission Control Module Programming

    5. Important: It is recommended that the transmission adaptive pressure (TAP) information be reset.

    Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the ECM, PCM or TCM will need to relearn the TAP values. Transmission performance may be affected as new TAP values are learned.

  5. Reset the TAP values. Refer to Transmission Adaptive Functions .