For 1990-2009 cars only
- Open the liftgate and the tailgate. See Liftgate/Tailgate for more information.
- Remove the two screws from the taillamp housing.
- Turn the lamp outboard, then pull the assembly firmly rearward.
- Unscrew the bulb socket from the lamp assembly by pressing the tab while turning the bulb socket counterclockwise.
- Replace the bulb by pulling the old one out and gently pushing the new one into the bulb socket.
- Line up the tabs on the bulb socket with the gaps in the socket holes and screw the bulb socket back into the lamp housing. You will hear a click.
- Reinstall by aligning the pins on the back of the lamp with the sockets on the outboard side of the lamp opening.
- Push forward until the pins snap into the socket.
- Reinstall the screws removed in Step 2.
Stop/Taillamps
Back-up Lamps
