GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 381406  Size: SH
  1. Remove the inflator fill valve access cover.
  2. Remove the lower rear quarter trim panel. Refer to Rear Quarter Lower Trim Panel Replacement in Interior Trim.
  3. Remove the switch from the inflator control panel.
  4. Disconnect the electrical connector from the inflator switch.

Installation Procedure


    Object Number: 381406  Size: SH
  1. Connect the electrical connector to the inflator switch.
  2. Install the inflator switch in the inflator control panel.
  3. Install the lower rear quarter trim panel. Refer to Rear Quarter Lower Trim Panel Replacement in Interior Trim.
  4. Install the inflator fill valve access cover.