For 1990-2009 cars only
Removal Procedure
- Lower the headliner in order to access the drain hose connections. Refer to Headlining Trim Panel Replacement in Interior Trim.
- Remove the clamp (3) and the drain hose (2) from the drain spout.
- Remove the interior moldings in order to access the drain hose retaining clips. Refer to Windshield Pillar Garnish Molding Replacement or Rear Quarter Trim Panel Replacement in Interior Trim.
- Remove the tape from the drain hose.
- Remove the front drain hose (1) from the retaining clips.
- Remove the rear upper drain hose (1) from the retaining clips.
- Remove the clamp (3) and the drain hose (2) from the drain spout.
- Remove the rear compartment trim panels. Refer to Rear Compartment Side Trim Replacement - Left Side or Rear Compartment Side Trim Replacement - Right Side in Body Rear End.
- Remove the rear lower drain hose from the retaining clips.
Installation Procedure
- Clip the rear lower drain hose into position.
- Install the rear compartment trim. Refer to Rear Compartment Side Trim Replacement - Left Side or Rear Compartment Side Trim Replacement - Right Side in Body Rear End.
- Clip the rear upper drain hose (1) into position.
- Attach the hose (2) to the drain spout and secure the hose clamp (3).
- Clip the front drain hose (1) into position.
- Apply adhesive tape in order to secure the hose to the pillar.
- Install the interior moldings. Refer to Windshield Pillar Garnish Molding Replacement or Rear Quarter Trim Panel Replacement in Interior Trim.
- Install the drain hose (2) to the drain spout and secure the clamps (3).
- Install the headliner to the roof. Refer to Headlining Trim Panel Replacement in Interior Trim.
Important: When installing the drain hose clamps (3), position the clamps in order to maintain clearance between the clamps and the headliner.
Notice: Use care when removing and installing the headliner. If reusing the headliner lay the headliner down flat on a clean surface. Excessive bending will damage the headliner.
