Electronic Traction Control Switch Replacement w/NW9
Removal Procedure
- Remove the center console
trim plate. Refer to
Console Trim Plate Replacement
in Instrument Panel, Gages and Console.
- Disconnect the traction
control switch electrical connector.
- Remove the traction control switch fastener (3).
- Remove the traction control switch (2).
Installation Procedure
- Install the traction control
switch (2).
- Install the traction control switch fastener (3).
- Connect the traction control switch electrical connector.
- Install the center console
trim plate. Refer to
Console Trim Plate Replacement
in Instrument Panel, Gages and Console.