Removal Procedure
Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could cause the following conditions:
• | Unnecessary SIR system repairs |
In order to avoid the above conditions, observe the following guidelines:
• | Refer to SIR Component Views in order to determine if you are performing service on or near the SIR components or the SIR wiring. |
• | If you are performing service on or near the SIR components or the SIR wiring, disable the SIR system. Refer to Disabling the SIR System. |
- Disable the SIR system. Refer to
Disabling the SIR System
in SIR.
- Remove the steering wheel. Refer to
Steering Wheel Replacement
.
- Remove the steering column shrouds. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Remove the TORX® head fastener from the shift lever to shift
control.
- Pull the shift lever upward to remove it from the shift control.
Installation Procedure
- Push the shift lever downward
to engage it into the shift control.
- Install the TORX® head fastener.
- Install the steering column shrouds. Refer to
Steering Column Trim Covers - Assemble - Off Vehicle
.
- Install the steering column. Refer to
Steering Wheel Replacement
.
- Enable the SIR system. Refer to
Enabling the SIR System
in SIR.