- Install the shift lever
seal (2) onto the shift lever (4).
Caution: Improper routing of the wire harness assembly may damage the inflatable
restraint steering wheel module coil. This may result in a malfunction of
the coil, which may cause personal injury.
- Install the shift lever (4) and secure it with
the shift lever screw (3).
Tighten
Tighten the screw to 1.5 N·m (13 lb in).
- Slide the shift lever seal (2) down the shift lever (4).
- Reconnect the shift lever
connector.
Caution: Improper routing of the wire harness assembly may damage the inflatable
restraint steering wheel module coil. This may result in a malfunction of
the coil, which may cause personal injury.
- Install the wire harness straps.
- Install the wire harness assembly into the wire restraint clip (1).
- Install the upper and lower trim covers. Refer to
Steering Column Trim Covers - Assemble - Off Vehicle
.
- Enable the inflatable restraint steering wheel module. Refer to
Enabling the SIR System
in SIR.