Tools Required
• | J 42137 Steering
Column Lock Plate Compressor Adapter |
- Install the inner race (5).
- Install the upper bearing inner race seat (4).
- Install the upper bearing spring (3).
- Lubricate the turn signal cancel cam assembly (2).
Important: The electrical contact of the turn signal and multifunction switch assembly
must rest on the turn signal cancel cam assembly.
- Install the turn signal cancel cam assembly (2).
- Install the cam orientation plate (1).
- Install the new bearing
retainer using J 23653-SIR
.
- Remove J 23653-SIR
from the steering shaft assembly.
- Install the inflatable restraint steering wheel module coil. Refer
to
Inflatable Restraint Steering Wheel Module Coil Assemble - Off Vehicle
.
- Enable the inflatable restraint steering wheel module. Refer to
Enabling the SIR System
in SIR.